Thursday, April 23, 2009

Ready for finish

Headboard's in the clamps - woodworking is done.

A lot of stuff happened tonight:
Routed a dado on the inside of each leg to accept the panel (edge guide + plunge router).
Laid out the panel and table/ jig sawed it out.
Laid out the V-grooves to simulate the individual boards and routed them on the new router table.
Planed / chamfered all the faces / edges of the legs and rails.
Rough sanded all the headboard parts.
Glued it up.

If I didn't have to work tomorrow, it would be done. I don't see how I'm going to get multiple coats of paint on it and get it delivered tomorrow night when I'll be working most of the day.